Harben "E" Trailer Jetters

Select from three Harben "E" series models: Standard "E", E180 (shown above with options) and E45

---

Standard E, pictured at the right. Get all of Harben's most important functional equipment with the Standard E trailer jetter. Standard features include:

• An air cooled, industrial class diesel engine. Federal EPA Tier 4 rated; exempt for CARB PERP registration requirements and fees. 2-year comprehensive warranty
• Harben "P" pump with 5-year warranty. Jet up to 18 gpm and 4,000 psi. Other pressure and flow combinations are available.
• 300 gallon U.V. protected polyethylene water tank with 5-year warranty. Rigid fill line pipe with side access hose fitting and tank air gap to prevent cross contamination
• Fixed position hose reel with 500-ft. of lightweight 1/2" thermoplastic sewer hose wrapped on a 700-ft. x 1/2" capacity hydraulically powered hose reel
• 6.7 cu. ft. poly tool box for secure, bulky items storage
• Lightweight single axle trailer, 16" wheels, spring suspension, electric brakes, DOT required safety lights, 5/16" ball hitch and rigid tubular steel frame.
• Powder coated trailer frame and body for long term durability in marine and other harsh environments.

See our web page, Trailer Jetters: Standard Features.

---

E 180, pictured at top and at the right. This is the newest innovation of Harben E series jetters featuring an unobstructed pivoting hose reel and flat fenders.

• Get all the standard "E" machine features.
• The hydraulically powered hose reel pivots 110-degrees to the right and left of center allowing access to tight work sites when jetter maneuverability is difficult. There are four lockable positions.
• Jet up to 18 gpm and 4,000 psi. Other pressure and flow combinations are available.
• Add bright, diamond tread lockable tool boxes to the top of each fender and a full width tool box behind the tank for secure storage of high pressure guns and lances.

See our web page, Trailer Jetters: Optional Features.

---

E45, pictured at the right. When space is required to store bulky items, choose the E45.

• Get all the standard "E" machine features.
• Jet at pressures up to 4,000 psi and 18 gpm
• The hydraulically powered hose reel pivots a minimum of 90-degrees to the right and 45-degrees to the left. There are four lockable positions.
• Next to the pivoting hose reel, there's space for a deep 6.7 cu. ft. lockable storage box or an optional expanded metal cage.
• Use the rear storage area for cones, garden fill hose or hand carried spools of 3/8", 1/4" or 3/16" high pressure hose.
• Mount an available garden hose reel on top of a open cage with a fill connection to the water tank.

See our web page, Trailer Jetters: Optional Features.