Harben's distinctive bullet proof rotary piston water pump is featured as standard equipment on all Harben "E" series jetters.

• Pump solvents, salt water and fresh water
• 8-cylinder design delivers a peak flow rate of 16 gpm and peak pressure of 4,000 psi. "P" pumps with optional flow rates and pressures available
• Run dry without water indefinitely!
• 5-year warranty!
• Long service life uniterrupted by repairs and downtime

Industrial class 3-cylinder Deutz air cooled diesel engine

• Rated 48-h.p. @ 2,800 rpm
• Automatic low oil pressure and high temperature engine shut down safeguards
• Two-year comprehensive warranty; key components warranted for three years
• Space saving footprint
• Mounted on vibration absorbing insulation pads
• Low noise emission design alleviates the need for expensive noise insulation measures
• EPA Clean Air Act Interim Tier 4 qualified>
• For California users, all "E" jetter diesel engines are exempt from CARB PERP fees, registration requirements and inspections.
• Upgrade this engine with shrouded air and water cooled diesel engines from Hatz and Kubota

• Shrouding protects against injury, vandalism and mischief
• Flexible couplings dampen noise and reduce vibration
• Elimintation of drive belt(s), bushings and sprockets means lower repair costs and downtime

• Repairable
• 300-gallon capacity. Add additional tanks to fit customized applications
• U.V. protected
• 5-year warranty
• Rigid fill line pipe with hydrant or garden hose fitting
• Tank air gap to protect against cross contamination

• Protected from water intrusion and vandalism. NEMA 4 rated
• Generic, off the shelf after market ensures expedited availability of replacement at a lower cost
• Controls feature LED start-up and warning lights, digital engine hour meter and 12-volt keyed ignition switch

• "E" jetters feature hydraulic powered Hannay hose reels. Reel dimensions may be customized to meet specific requirements. Wrap up to 700-feet of 1/2 inch high pressure thermoplastic hose on E-series jetters.
• Reels are provided with 500-feet of 1/2 inch high pressure hose.
• Hose reels are mounted on frames constructed of sectional steel tubing—not angle iron.
• Reels are positioned on the reel frame to reduce exposure to accidental damage from backing.
• Pivoting hose reel mounted at the center-rear of the jetter. Reel manually pivots a minimum 90-deg. to the left and 90-deg. to the right. 5 locking positions
• Reels are furnished with a manually operated level wind hose guide with lever handle.
• Reel drums are powder coated—not painted—for durability in wet and harsh environments

• Engineered for durability and easy towing.
  • Rugged tubular steel frame with leaf spring suspension and a single axle. Dual axles available
  • Weighs under 3,000 pounds. Trailer axle and suspension GVWR: 6,400 pounds
  • 16" painted wheels
• Choose from standard electric or hydraulic surge trailer brakes. Hydraulic surge brakes are a convenience option provided by Harben at no additional cost, when requested.
• Frames, control panel, engine and hose reel are powder coated—not painted—for added protection against deterioration in harsh environments.
• Solid colors other than white and distinctive pin striping are provided as extra cost options
• 2-5/16" ball hitch (pictured)

• Fenders installed on Harben E180 trailers have flat tops with non skid surfaces.
• Mount optional tool boxes or open baskets on fender tops
• Fenders are equipped with an amber clearance light to conform with Federal DOT and State of California vehicle regulations. Ref.: Code of Federal Regulations, Title 49, Part 390, "Federal Motor Safety Regulations" and California Motor Vehicle Regulations, Title 13, Section 25100, "Clearance and Side-Marker Lamps".
• Coat the front face of each fender with an epoxy chip gaurd at no additional cost