Learn more about IRS Section 179 deductions on our FAQ page or click on the banner above.

Features

Get all of Harben's most important functional equipment—STANDARD—plus an unrestricted pivoting hose reel and boxed fenders with the model E180 trailer jetter.

PUMP

• Harben rotary piston "P" pump
  • 5-yr. warranty
  • Unrivaled dependability: operate thousands of hours without a major overhaul
  • Jet up to 18 gpm and 4,000 psi
  • Pump runs dry indefinitely—no risk of overheating
  • Pump fresh water, reclaimed water, salt water and hundreds of soluble chemicals
• Other pressure and flow combinations available—all with the same performance qualities
• Learn more

ENGINE AND DRIVE SYSTEM

• Deutz industrial class air cooled diesel engine—rated 48 h.p. Learn more
• Federal EPA tier 4i rated and exempt from CARB PERP registration requirements and fees. Learn more
• Engine, gear box and pump assembly direct coupled and shrouded. No clutch, belt or sprockets to adjust, wear or replace. Learn more
• Gear box manufactured with flexible couplings to reduce noise

HOSE REEL

• Reel furnished with 500-ft. x ½-in. lightweight thermoplastic sewer hose
• Pivoting hose reel. Reel manually swivels a minimum of 135-degrees left and right with 5 locking positions
• Learn more

WATER TANK

• 300-gallon capacity, rotationally molded, U.V. protected polyethylene water tank
• Rigid fill line pipe with side access hose fitting and tank air gap
• Learn more

TRAILER

• Single axle trailer equipped with 16-in. wheels, leaf spring suspension, electric or hydraulic surge brakes, DOT and California DMV required running and clearance lights and 5/16-in. ball hitch.
• Frame built with rigid tubular steel
• Powder coated frame and body for long term durability in marine and harsh environments
• Boxed fenders coated with an epoxy chip guard and fitted with clearance lights
• Light weight and maneuverable—weighs 3,100 pounds (approx.); length: 176-inches
• Low profile for safe visibility
• Learn more

CONTROLS

• 12-volt keyed ignition, cable variable throttle control, lever operated water selector and reel rotation control valves
• Sealed and lockable control panel. NEMA 4 rated
• Learn more

ACCESSORIES

• Tool box for secure storage of bulky items. Learn more
• 12-volt accessory outlet
• Complete complement of tools including two high efficiency nozzles, 10-ft. x ½-in. leader hose , 2-in. x 36-in. flexible hose guide and nozzle extension
• Descriptive operation, parts and maintenance manuals or CD for pump, engine and jetter

Applications

• Clean heavy concentrations of grease from commercial and residential drain lines without damaging clay or schedule 80 PVC pipe. Use optional rotating nozzles to scour lines up to 18-inches in diameter.
• Shred roots in lateral lines
• Blow mud, sand and gravel from pipe up to 10-inches in diameter
• Strip light scale and chemical deposits from pipe interiors without abrasive chains, cables and brushes
• Dial down the flow rates to clean small drains with available 3/16-in., 1/4-in. and 3/8-in. hose and specialty nozzles
• Use optional “Hoverclean” scrubbers and safety guns with rotating turbo nozzles to scour surfaces. Remove light concentrations of paint and grease without adding abrasives to the jet stream.
• Add dry and wet abrasive blasting kits to eradicate heavy concentrations of paint, chemicals, rust and marine crustaceans from surfaces . Use precision cutting kits to lance steel pipe, core through bulkheads and debur machined parts.
• Remove wastewater spills and loose surface debris with diameters up to 3-in. from job sites with Harben’s optional “Jet Pump” venturi tools and suction hose. Transport loose debris and wastewater up to 25-ft. from job sites

Options

• Engines
  • Kubota 4-cyl. water cooled diesel with shroud. Rated 48 h.p.  Learn more
  • Hatz 3-cyl. air cooled diesel with "Silent Pack" shroud. Rated 49 h.p.  Learn more
• "Jump Jet" pulsation system.  Learn more
• Wireless and cabled remote controls.  Learn more
• Foot pedal for remote jetting.  Learn more
• Pressure relief valve. Returns over pressure water to tank. Replaces standard plastic rupture disc.  Learn more
• Adjustable hydraulic hose reel rotation speed control valve
• Free spin hose reel selector valve. Overrides hydraulic powered reel rotation
• Diverter valve. Permits use of small diameter hoses.  Learn more
• Fender mounted tool boxes.  Learn more
• Chrome wheels.  Learn more
• Fold away trailer jack.  Learn more
• Mini hose jet kit furnished with 1/4-in. hose and ball nozzle.  Learn more
• Auxiliary hose reels—electric powered, spring retractable or manual crank.  Learn more
• Roll-off, cart-mounted auxiliary hose reel for longer lengths of 3/8” ID hose.  Learn more
• High pressure hoses—3/16”, 1/4”, 3/8”, 1/2” and 5/8” ID—for multiple cleaning applications.  Learn more
• Leader hoses  Learn more
• Flexible hose guides ("tiger tails").  Learn more
• Level wind hose guide with counter.  Learn more
• Work lights  Learn more
• Safety lights
• Hand guns, lances and nozzles.  Learn more
• Nozzle storage rack mounted inside tool box.  Learn more
• Nozzles, cutting tools, manhole tools, plugs and chemicals.  Learn more
• On-site training programs—jetting safety; jetter operations; hydro-jet cleaning; equipment maintenance and repair.  Learn more

Documents downloadable in Adobe PDF format:

E180 Gallery of Pictures

Transportable reel on pneumatic tires for lateral hose